It provides a strong softening effect on the carbon particles accumulated in the DPF of diesel vehicles.
DPF neutralizer can be used to clean and maintain the DPF carbon particulate filter, effectively extending its service life mileage, cleans and regenerates the DPF, restores efficiency.
Cleaning area:
■ Carbon particulate filter
Product features:
■ Improve fuel efficiency ■ Restore engine power
■ Extends carbon particulate filter life
Instructions for use:
1. It must be used with our DPF cleaning tool set (6110 1110) and must be cleaned by a professional Technician operation.
2. Start the engine until it reaches operating temperature and then turn it off.
3. Confirm the location of the DPF, which is usually located in the engine room or near the exhaust pipe on the chassis.
After removing the temperature sensor, remove the temperature sensor.
4. Pour 500ml of DPF cleaning agent (6110 1105 1) into the DPF cleaning tool set.
Select a suitable nozzle, connect it to the bottle, and push the nozzle deep into the hole to spray the medicine evenly to the inside.
5. After standing for 15 to 20 minutes, pour in 1L of DPF neutralizer (6110 1105 2). The steps are the same as 4.
6. After 10 minutes of rest, replace the temperature sensor and start the engine and run it at idle speed for 10 to 15 minutes.
After a few minutes, white smoke will be discharged from the exhaust pipe.
7. Then drive the vehicle for about 15 minutes to allow the agent and dirt to be completely discharged. engine
It is recommended to maintain the speed above 2500 rpm to start the DPF regeneration process or to
Forced brain activation.
It is recommended to add 250ml of our DPF carbon particle cleaner (6053) to make the DPF
The regeneration process is more complete and the service life of DPF is effectively extended.
Items No.:
6110 1105 – DPF system set
6110 1110 – DPF Flush Gun
